HELLO PH BOND
$16.00
9 in stock
Guaranteed safe & secure checkout
Product details
Shipping and Returns
About the brand
Reviews
Questions
Product details
The dehydrator is used to prepare the nail plate for applying a polymer coating.
Eliminates moisture, degreases, removes dirt and dust residues, ensuring reliable adhesion of the base coat to the nail plate.
It has full compatibility with any kind of gel polish materials: varnish, gel polish, gel.
Shipping and Returns
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
HELLO
HELLO. brand created for people who in all their decisions are guided by a sense of beauty. For those who are vital to work with a harmonious product.
HELLO. - is a product that deserves your attention if:
- You are a perfectionist;
- Product safety matters to you;
- You pay special attention to the selection of a palette;
- You run a premium beauty salon.
There are no question found.
Quick Comparison
| HELLO PH BOND remove | HELLO ULTRA BOND 15ml remove | Nail dehydrator NAIL FRESHER 8ml remove | ACID PRIMER 8ml remove | Cuticle and lateral nail folds SKIN DEFENDER 7,5ml remove | Acid-free рrimer ULTRABOND 8ml remove | |
|---|---|---|---|---|---|---|
| Name | HELLO PH BOND remove | HELLO ULTRA BOND 15ml remove | Nail dehydrator NAIL FRESHER 8ml remove | ACID PRIMER 8ml remove | Cuticle and lateral nail folds SKIN DEFENDER 7,5ml remove | Acid-free рrimer ULTRABOND 8ml remove |
| Image |  |  |  |  |  |  |
| SKU | ||||||
| Rating | ||||||
| Price | $16.00 | $16.00 | $7.00 | $7.00 | $6.00 | $7.00 |
| Stock |
9 in stock
|
8 in stock
|
8 in stock
|
4 in stock
|
4 in stock
|
10 in stock
|
| Availability | 9 in stock | 8 in stock | 8 in stock | 4 in stock | 4 in stock | 10 in stock |
| Add to cart | ||||||
| Description | ||||||
| Content | The dehydrator is used to prepare the nail plate for applying a polymer coating. Eliminates moisture, degreases, removes dirt and dust residues, ensuring reliable adhesion of the base coat to the nail plate. It has full compatibility with any kind of gel polish materials: varnish, gel polish, gel. | The acid-free primer works like a double-sided tape, ensuring reliable adhesion of the base coat to the nail plate without disturbing the natural PH balance. Prevents the appearance of delaminations and chips, prolonging the durability of the coating. | Dehydrator NAIL FRESHER - liquid for dehydrating (degreasing) nails. It is a mandatory step when preparing the nail plate for applying gel polish or extensions. It is used before applying a primer or base coat. Increases the durability of manicure. Application technology: 0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail. 1. Degreasing: mechanically (using a buff) and chemically (using PREP&FINISH and a lint-free tissue) degrease the nail plate 2. Dehydration/dehydration: with a semi-dry brush, apply ACID PRIMER to the center of the NP and allow the agent to be evenly distributed. Try to apply the product in 1-2 movements, holding the brush at an angle of 15 degrees to the plate to prevent excessive adhesion. Allow to dry in the air until a whitish shade appears. | Acid primer ACID PRIMER is a means that forms/improves adhesion between the surface of the natural nail and the polymer material. It is used as the third stage of nail plate preparation in nail modeling and strengthening systems, and for wet nail plates. It is applied after the dehydrator before applying the base coat. It is recommended for use with polymer materials that have low acidity. For highly acidic base coatings, the use of primers should be avoided to prevent excessive adhesion (MULTI BASE, RUBBER BASE), or applied to the areas most prone to peeling (free edge). PH: 5.5. Application technology: 1. Prepare the nail plate for applying gel polish: perform a manicure, give the desired shape to the free edge of the nail. When using the remover, remove its residues with a wet tissue Degreasing: mechanically (using a buff) and chemically (using PREP&FINISH and a lint-free tissue) degrease the nail plate 2. Dehydration/dehydration: apply a thin layer of NAIL FRESHER to the entire surface of the nail, for wet hands – to the nail and side ridges. Allow to dry in the air until a whitish shade appears on the surface of the nail plate. If necessary, repeat several times. 3. Bonding: with a semi-dry brush, apply ACID PRIMER to the center of the NP and allow the agent to be evenly distributed. Try to apply the product in 1-2 movements, holding the brush at an angle of 15 degrees to the plate to prevent excessive adhesion. Allow to dry in the air until a whitish shade appears. | SKIN DEFENDER is a coating to protect the cuticle and lateral ridges during design. It has a liquid consistency, therefore it is evenly distributed and economically consumed. It is especially practical when working with stamping. After completing the design, SKIN DEFENDER can be easily removed with a thin elastic film. Application technology: 1. Apply the product in a medium layer around the nail plate and leave to dry for 20 seconds. 2. Get started with the design 3. After work, remove the SKIN DEFENDER film and use cuticle oil | Acid-free primer 8ml ULTRABOND acid-free primer is a product that forms/improves adhesion between the surface of a natural nail and a polymeric material. It is used as the third stage of the nail plate preparation in the gel polish system, nail modeling and strengthening systems. Applies after dehydrator before applying base coat. It is recommended to use with medium and low acidity base coats. For highly acidic base coats, primers should be avoided to avoid excessive adhesion (MULTI BASE, RUBBER BASE) or applied to areas most prone to peeling (free edge). The tool has a delicate effect on natural nails, has a neutral pH: 6. Application technology: 0. Prepare the nail plate for applying gel polish: perform a manicure, give the desired shape to the free edge of the nail. When using the remover, remove its residues with a wet tissue 1. Degreasing: degrease the nail plate mechanically (using a buff) and chemically (using PREP&FINISH and a lint-free tissue) 2. Dehydration: apply a thin layer of NAIL FRESHER on the entire surface of the nail, for wet hands - the nail and side ridges. Allow to dry in the air until a whitish tint appears on the surface of the nail plate. If necessary, repeat several times. 3. Bonding: with a semi-dry brush, apply ULTRABOND to the entire nail, stepping back from the cuticle and side ridges by 1 mm. Try to apply the product in 1-2 strokes to avoid excessive adhesion, holding the brush at an angle of 15 degrees. Allow to air dry for 15 seconds. Use in designs: 1. For sealing the ends after rubbing in before the top coating 2. To smooth out unevenness of the slider design before applying the base |
| Weight | N/A | N/A | N/A | N/A | N/A | N/A |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information | ||||||
| Sold | 1 | 2 | 1 | 4 | 0 | 1 |
| Shipping |
Rating & Review
There are no reviews yet.