Acid-free рrimer ULTRABOND 8ml

Product details

Acid-free primer 8ml

ULTRABOND acid-free primer is a product that forms/improves adhesion between the surface of a natural nail and a polymeric material.

It is used as the third stage of the nail plate preparation in the gel polish system, nail modeling and strengthening systems. Applies after dehydrator before applying base coat.

It is recommended to use with medium and low acidity base coats. For highly acidic base coats, primers should be avoided to avoid excessive adhesion (MULTI BASE, RUBBER BASE) or applied to areas most prone to peeling (free edge).
The tool has a delicate effect on natural nails, has a neutral pH: 6.

Application technology:
0. Prepare the nail plate for applying gel polish: perform a manicure, give the desired shape to the free edge of the nail. When using the remover, remove its residues with a wet tissue
1. Degreasing: degrease the nail plate mechanically (using a buff) and chemically (using PREP&FINISH and a lint-free tissue)
2. Dehydration: apply a thin layer of NAIL FRESHER on the entire surface of the nail, for wet hands – the nail and side ridges. Allow to dry in the air until a whitish tint appears on the surface of the nail plate. If necessary, repeat several times.
3. Bonding: with a semi-dry brush, apply ULTRABOND to the entire nail, stepping back from the cuticle and side ridges by 1 mm. Try to apply the product in 1-2 strokes to avoid excessive adhesion, holding the brush at an angle of 15 degrees. Allow to air dry for 15 seconds.

Use in designs:
1. For sealing the ends after rubbing in before the top coating
2. To smooth out unevenness of the slider design before applying the base