Liquid strengthening nail gel REPAIR GEL 7,5ml – clear

Product details

REPAIR GEL is a thin liquid gel for strengthening natural nails. Suitable for thin, brittle, dehydrated nails up to medium length (up to 3-5 mm free edge).

It is used as an additional reinforcing layer after applying a flexible adhesive base. Recommended for strengthening nails in the technique without leveling the architecture.

Advantages of REPAIR GEL:

+ instantly self-leveling

+ does not shrink

+ low acidity and final adhesion

+ does not cause allergies

The main advantage is a strengthening without thickening of the NP.

– used on the delicate mode of the lamp (24W)

Consistency: medium. Polymerization speed: high. After polymerization: hard. PH: 6.5

Application technology:

0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.

1. Degreasing: mechanically (using a buff) and chemically (using PREP&FINISH and a lint-free napkin) degrease the nail plate

2. Dehydration/dehydration: apply NAIL FRESHER to the entire nail, let it dry in the air until a whitish shade appears on the surface of the nail plate.

3. Bonding*: with a semi-dry brush, apply ULTRABOND acid-free primer to the entire nail, leaving 1 mm from the cuticle and side ridges. Allow to air dry for 15 seconds.

* when using MULTI BASE, this step can be skipped.

4. Base coat: apply MULTI/RUBBER BASE cushioning primer in a thin/rubbing layer. Polymerize the base coating in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds.

5. Strengthening: apply an even thin layer of REPAIR GEL, including the side walls and the free edge of the nail. Polymerize the gel in a UV lamp for 2-4 minutes, in an LED lamp for 60 seconds on a delicate mode.

To prevent detachment from the free edge, we recommend sawing the natural nail from the inside by 1-2 mm. You can fix the cut with a top.